Purchases over $20.00 on this page
are sent Priority Mail. Purchases under $20.00 are sent
1st class. Purchases on this page with any other items
from the website receive Priority shipping.
This is a great
versatile Gear box. Works with both our 400 and 450
series motors. It is compatible with the 10mm or
3/8 stick mounts and also can be used as a firewall
mount. The GWS 400 size shafts, spur gears, and pinion
gears are all compatible replacement parts, making it
easy and affordable to change setups.
Here is the quirk.
I have found a few of the gear boxes are not labeled
with the correct gear ratio, and a few are not labeled
at all. So we will include an extra spur and pinion to
suit your needs. How do you get the free spur and
pinion? Make a note while checking out, let us know what
gear ratio you need. If you do not make a note we will
assume you do not need a specific set and we will not
send the extra set.
Available ratios
are as follows: 2.4:1, 2.38:1, 2.67:1, 3:1, 3.4:1,
3.9:1, 4.5:1, 5.28:1, 6.3:1. If you need help deciding
on the gear ratio for your set up feel free to drop us a
line, we are more then happy to help all we can.
$17.00
Free Shipping
Spur and pinion
sets are available Make sure you make a note on check
let us know what gear ratio you need. Or simply drop us
a line.
The GWS 400C gear
boxes fit all of the 400 series motors on the sire. With
gear ratios from 2.4:1 through 6.3:1 finding your set up
is easy and affordable with common replacement parts
available through milehighrc.com or your local hobby
store. This gear box is only stick mount compatible.
2.3mm shaft used for 300, 400
and 450 series outrunners
$2.90 - Free Shipping
3mm Shaft used for 300, 400, and 450 series
outrunners
$2.90 - Free Shipping
Out of
stock - More on Order
2.3mm shaft is
needed when used in a gear box, but can be used direct
drive as well. 3mm shaft is recommended when going
direct drive the extra thickness is a bit stronger. 3.1mm shafts for the 500 series motors.
We also have some 3mm shafts with a 3.1mm tip. The 3.1mm
tip is great for using the 300 and 400 series motors
with a folding prop where the adaptor in the prop is
3.1mm.
Plastic GWS stick mount
suitable for 400 and 450 series outrunner motors.
Motor mounts for 10mm stick mount.
Pusher or puller application, in other words the motor
can mount on either side of the mount. Clips hold the
motor wires out of the way. Does not come with screws.
Photo is for illustration of front and back only you
will receive only one for $1.90. Max. Motor Diameter is 28MM. Weight
.2oz.
$1.90 Each - Free Shipping
Aluminum GWS stick mount
suitable for 400 and 450 series outrunners.
Motor mounts for 10mm
stick mount.
Motor can mount on
either side of mount but is made to mount from behind.
Has great strength yet is still easy to adjust the
thrust line. With 2 screws going all the way through the
stick and mount this baby is not going anywhere. Comes
as pictured. Max. Motor Diameter is 28MM. Weight
.12oz (3.47g)
$3.80 Each
- Free Shipping
Note: GWS
Aluminum Stick mounts may be discontinued. We will order
more as available.
2.4mm Gold connectors to be used to
connect the Motor to the ESC. Comes with 3 male
and 3 female 2.4mm connectors and 3 pieces of 1 1/2"
long shrink (Red, Blue, yellow). Fits 11 Gauge wire, 30
Amps max, connectors must be soldered not crimped as the
design would lead you think.
$2.90 Per TrioSet
- Free Shipping
3.5
mm Gold Connectors
3.5mm Gold connectors to be used to
connect the Motor to the ESC. Comes with 3 male
and 3 female 3.5mm connectors and 3 pieces of 1 1/2"
long shrink (Red, Black, yellow). Fits up to 8 Gauge
wire, 70 Amps max.