|
5065-7 320KV Outrunner Brushless Motor
(1600 - 2100 Watts)
Run this motor on 3-8 cell lipos and match it with an ESC of
80+ Amp capacity.
The motor comes as photo with bullet connectors pre-installed,
the female connectors for the ESC are included as well. Nice bell
adaptor also has a nut incase an aftermarket spinner is used. The 6mm shaft is replaceable. Mount
in front of or behind firewall.
Motor is rate at 1600
Watts with max burst of 2100 Watts, when propped for 1600 watts use this motor on 3D birds from
8-9 pounds or general flight
to birds in the 15-18 pound range.
|
N5065/07
Battery:
3-8 cells Li-Po
Kv
(Rpm / V): 320
Weight: 15.1 oz. (430g)
Size: 49.5 x 65mm
Resistance (MΩ): 30
No
load current: .8A
Turns:
7
Power:
1600W (2100 Burst)
ESC:
80A minimum
Suggested props:
15 x 10 to 18 x8 |
N5065/7 320KV
$69.59
|
As we do with all new outrunners we
are offering a buy back for video or test stand thrust data.
|
Accessory Set for 50 Series Outrunners
$5.00
|
Replacement shafts for N5065
$5.00 |
Motor Mount for 5065 Outrunners
$8.00
|
|
