|
C5055-8 400KV Outrunner Brushless Motor
(1375 Watts)
Run this motor on 3-8 cell lipos and match it with an ESC of
80 Amp capacity.
The motor comes as photo with bullet connectors pre-installed,
the female connectors for the ESC are included as well. Nice bell
adaptor also has a nut incase an aftermarket spinner is used. The 6mm shaft is replaceable. Mount
in front of or behind firewall.
Motor is rate at 1375
Watts, when propped for 1375 watts use this motor on 3D birds from 7-8 pounds or general flight
to birds in the 11-13 pound range.
|
C5055/08
Battery:
3-8 cells Li-Po
Kv
(Rpm / V): 400
Weight: 10.9 oz. (310g)
Size: 49.5 x 55mm
Resistance (MΩ): 31
No
load current: 1.6A
Turns:
8
Max Power:
1375W
ESC:
80A
Suggested props:
14 x 8 through 17 x 9 |
C5055/08 400KV
$56.82
|
As we do with all new outrunners we
are offering a buy back for video or test stand thrust data.
|
Accessory Set for 50 Series Outrunners
$5.00
|
Replacement shafts for N5055
$5.00 |
Motor Mount for 5055 Outrunners
$8.00
|
|
