|
Mile High
RC's Outrunner Brushless Motor's
2835-10 830KV Outrunner Brushless
Motor
This is a nice light direct drive
outrunner
motor. Run this motor on 2-4 cell lipos (7-15 metal
cells) and match it with an ESC of 12 Amp through 30Amp
capacity. The motor comes as photo with 3.5mm connectors
pre-installed and the female connectors for the ESC are
included as well. Also including an X-mount, prop saver,
and cullet type prop adaptor the 3.17mm shaft is
reversible and replaceable.
2835-10 830KV
2-4 Cell Lipo
830KV ~
22 Amps
~ 220 Watts
Weight:
2.4oz (68g)
Diameter: 27.7mm Shaft:
3.17mm
Direct Drive Stats (Stats by us at
4,907' above sea level)
|
Motor Data for 2835-10 830KV |
|
Prop Type |
Prop Diameter |
Prop Pitch |
Voltage |
Thrust Oz. |
Thrust Grams |
RPM |
Amps |
Watts |
Pitch Speed |
|
- |
No |
Load |
12.23 |
- |
- |
- |
1.0 |
- |
- |
|
APC E |
8 |
4 |
11.9 |
13.5 |
382.7 |
8880 |
5.1 |
60.7 |
34 |
|
APC SF |
8 |
3.8 |
11.8 |
15.5 |
439.4 |
8580 |
6.2 |
73.2 |
31 |
|
APC SF |
8 |
6 |
11.6 |
18 |
510.3 |
7860 |
9.1 |
105.6 |
45 |
|
APC SF |
9 |
3.8 |
11.7 |
20.3 |
575.5 |
8160 |
7.6 |
88.9 |
29 |
|
APC SF |
9 |
6 |
11.4 |
23.4 |
663.4 |
7260 |
11.4 |
130.0 |
41 |
|
GWS HD |
9 |
5 |
11.7 |
19.9 |
564.2 |
8320 |
7.1 |
83.1 |
39 |
|
GWS HD |
10 |
6 |
11.4 |
23.7 |
671.9 |
7710 |
9.8 |
111.7 |
44 |
|
APC E |
9 |
6 |
11.4 |
20.5 |
581.2 |
7790 |
8.7 |
99.2 |
44 |
|
Xoar |
10 |
5 |
11.5 |
21.7 |
615.2 |
7740 |
8.7 |
100.1 |
37 |
|
APC SF |
10 |
3.8 |
11.1 |
26.3 |
745.6 |
7260 |
10.9 |
121.0 |
26 |
|
APC E |
10 |
7 |
11.1 |
22.8 |
646.4 |
6990 |
11.3 |
125.4 |
46 |
|
APC E |
10 |
10 |
10.8 |
17.4 |
493.3 |
6180 |
15.4 |
166.3 |
59 |
|
APC SF |
10 |
7 |
10.9 |
27.8 |
788.1 |
6420 |
14.1 |
153.7 |
43 |
|
GWS HD |
11 |
7 |
10.9 |
30 |
850.5 |
6750 |
12.4 |
135.2 |
45 |
|
APC E |
11 |
5.5 |
11 |
27 |
765.5 |
6950 |
11.4 |
125.4 |
36 |
|
APC SF |
11 |
4.7 |
10.8 |
31.5 |
893.0 |
6420 |
13.9 |
150.1 |
29 |
|
APC E |
11 |
8 |
11.2 |
27.1 |
768.3 |
6360 |
15.3 |
171.4 |
48 |
|
APC SF |
12 |
3.8 |
11.1 |
35.3 |
1000.8 |
6090 |
16.4 |
182.0 |
22 |
|
Copyright www.milehighrc.com all rights reserved |
Factory Info: 830KV - IO .9 - 6-12 NiCd/Mh
2-4 Cell Lipo - Suggested prop 11x7
$27.55
Free Priority Shipping
Out of Stock. More on Order. Drop a line
to be put on the notification list
sales@milehighrc.com
Motor Qualifies for
Buy Back For Video Program
Extras:
Items you may find useful are in the
accessories Section.
Plastic GWS stick mount suitable for 400 and 450
series outrunner motors. Motor mounts for 10mm stick
mount. Pusher or puller application, in other words the
motor can mount on either side of the mount. Clips hold
the motor wires out of the way. Does not come with
screws. Max. Motor Diameter is 28MM. Weight .2oz.
Note: You will only
receive one. Two are in the photo only to show both sides.
$1.90 Each:
Aluminum stick mount
$4.35 Each
|
