Specifications
Material:
EPO Foam
Wingspan:
1200mm(47.24in )
Length:
970mm(38.19in )
Height:
330mm(12.99in )
Flying
Weight: Around 1600g
Landing
Gear: Rotating Electric Main and tail gear
Propeller:
4-Bladed 13×6
Motor:
480KV Brushless Ф36X48Ф4
ESC:
40A Brushless ESC
Servos:
7X9g
Battery:
14.8V/25c/2200mAH~2600mAh Li-po
Recommended
Radio System: 6CH 2.4G Radio system
|
Features:
Made of EPO Foam with quality material this warbird is a
blast to build and fly. All you need is a receiver and 3-4 cell
1800-2200 lipo, all other components are included. The nice
13x6.5 four blade props performs great and comes with a scale
spinner and hub, a nice touch (spares are available). The 3648-4 outrunner has plenty
of power and provides better performance then one would expect
from a stock set up. The Included 40 Amp esc and pre wired BEC
are a perfect match for the motor and servo system power. The
seven pre-installed 9g servos are more then adequate for this
bird. The installed and wired retracts are great, and strong,
going a step further the tail wheel also retracts. Building this
bird is a snap. Glue the wings together, glue the horizontal
stab on, glue in the rudder, connect control horns and rods,
plug in servo leads to your receiver, add a battery and you are
ready for the field. Flying is great, it is a war bird and with
that big prop you would think take off would be a chore,
although not a trainer we were pleasantly surprised at easy of
flight and the power generated from this stock system. As for
landing - to date we have not used the flaps it lands that easy.
Take a look at some of the videos below.
|
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
